The service is the boring bit that keeps the romance alive
If you’ve ever asked what happens during a watch service, expect less drama than the internet suggests. It’s mostly inspection, cleaning, measurement and patience.
Alpha Group is a UK workshop that focuses on servicing and repairs, refurbishment and polishing, vintage watch restoration and luxury watch battery replacement. That scope matters. A proper overhaul is not the same thing as a quick exterior clean or a strap swap.
Think of this as a watch service overview. It’s a checklist of what a competent workshop should do, what you should be asked, and what you should receive back.
Before it goes on the bench
Most frustrations start at the handover. A watch arrives with a vague note that says “running fast.” No service history. No mention of water exposure. That wastes time.
Bring a short description of the fault. Mention when it shows up. Mention any knocks, drops or moisture incidents. That single paragraph can save a lot of back and forth.
It also helps to be clear about use. A daily Rolex Explorer lives a different life from a vintage Omega Seamaster that only leaves the box for dinners. A workshop can’t guess that.
Here’s what to expect from watch service before any tools come out.
- Your watch is booked in and identified by model details and serial where accessible
- The workshop checks basic functions, setting, winding feel and crown operation
- You’re told what can be confirmed at intake and what needs deeper inspection
- You receive an estimate once the likely causes are understood
If the watch is still under a manufacturer warranty, ask the brand first. Rolex explains its own care and servicing route through its network on the Rolex watch care and servicing page.

What happens during a watch service: the bench sequence
A full service is a controlled dismantle and rebuild. It’s also a decisions process. Those decisions should be discussed with you, particularly on vintage pieces.
First comes diagnosis. Timekeeping is checked. Functions are tested. The case, crystal, crown and pushers are assessed for wear and for signs of past moisture.
Then the movement is disassembled and cleaned. Parts are inspected under magnification. Worn components are identified for replacement where appropriate.
Lubrication is not a single drop in the right place. Different contact points require different oils and greases. Too much attracts debris. Too little accelerates wear.
Reassembly is followed by adjustment. The goal is stable performance across positions. The goal is also reliable power delivery, particularly on automatic movements.
Case components matter as much as the movement. Seals and gaskets are consumables. A watch can run well and still be a poor idea near water.
If you want a manufacturer example of the typical stages, Omega publishes a step based outline of its complete service in “interventions and prices” under complete OMEGA watch service: the main steps.
These are the watch repair steps in plain English. It’s not mysterious. It’s just thorough.
Parts, polishing and the awkward decisions
Servicing is where owners meet trade offs. You can keep every mark on the case. You can also ask for cosmetic improvement. Both are valid. They lead to different outcomes.
Refurbishment and polishing should be discussed, not assumed. A sharp bevel on a sports case is not something you want rounded off. A high polish on a Cartier Santos bracelet can look brilliant. It can also soften edges if handled badly.
Vintage restoration is its own category. Some clients want sympathetic stabilisation. Other clients want a period correct rebuild. The workshop should explain what’s reversible and what’s not.
Parts availability is the reality check. Some components are straightforward. Other components depend on the brand’s supply chain or on specialist sourcing. If a part can’t be sourced, a responsible workshop explains the options rather than improvising.
Quartz watches have their own pitfalls. A simple battery swap can expose damaged seals or a compromised caseback. Luxury watch battery replacement should include a condition check. It should also include resealing where the design requires it.
If you’re tempted to prioritise speed over care, pause. Cosmetic work is easy to sell. It’s harder to do well.

Testing, water resistance and the paperwork that proves it
Testing is where good workshops separate themselves from enthusiastic tinkerers. Timing checks after regulation are expected. Final checks after casing up are expected.
Water resistance is often misunderstood. It’s not a lifetime promise. It’s a result at a point in time, based on seals, tolerances and correct assembly.
Some brands state clear expectations for routine testing. For example, an Omega user manual for a current model states that water resistance should be tested once a year by an authorised service centre. See the wording in the Omega user manual PDF.
You should also expect paperwork. At minimum, you want a description of work completed. You want notes on any parts replaced. You want advice on what not to do next.
Alpha Group should be able to explain its scope clearly. It’s an independent specialist. It’s not an official brand service centre. That distinction is healthy.
A checklist you can use for your next booking
If you want the simplest way to judge a workshop, listen for clarity. A good service intake sounds ordinary. It’s specific. It avoids big promises.
Use this as a watch servicing guide when you email or call.
- Describe the symptoms, including when they started and whether they’re constant
- State the watch’s normal use, including water exposure, sport and storage habits
- Say whether you want refurbishment and polishing or a strict preservation approach
- Ask what the workshop will test before return, including timing and sealing where relevant
Ask how issues are approved. You want to know whether the workshop will contact you before additional work begins. You also want to know whether replaced parts can be returned, where appropriate.
Don’t be shy about asking who will do the work. The UK has strong training routes in horology. The British Horological Institute courses page gives a feel for the level of structured skill involved.
This is the watch maintenance process at its most practical. The best outcome comes from good information, sensible choices and realistic expectations.

Frequently Asked Questions
Is a watch service the same as a repair?
A service is scheduled maintenance that restores correct function and reliability. A repair addresses a specific fault, such as a damaged crown or broken stem. In practice, a fault often reveals wider wear once inspection begins.
Should I ask for polishing during servicing?
Only if you want it. Polishing can improve appearance, particularly on heavily marked bracelets. It can also soften edges and change original lines if it’s overdone. Ask what finish will be preserved and what will be altered.
What should I provide with the watch when I book it in?
Provide a clear written description of the problem and your usage. Mention any water exposure, knocks or magnet related issues. Bring the box, papers and warranty card only if you’re specifically asked for them.
Will my watch be water resistant after servicing?
A workshop can test sealing and replace worn gaskets where appropriate. That gives a result for that day, not a permanent guarantee. If you rely on water resistance, ask what tests were performed and what the limits are for your model.
Do quartz watches really need servicing?
They still benefit from checks, particularly for seal condition and case cleanliness. A battery change is also a good moment to spot early corrosion or moisture marks. If a battery has leaked, the watch may need more than a battery replacement.



