Skip to content

Independent Audemars Piguet care

Audemars Piguet servicing in London.

Discuss servicing and repair care for your Audemars Piguet with our experienced Farringdon team.

Independent watchmakers · Farringdon

Watch movement held in a movement holder while a part is adjusted with tweezers

“Thank you for bringing my watch back to life, it feels new again!”

Sj S · Read Google review

Our Farringdon workshop

9 St Cross Street, Farringdon · London EC1N 8UB

Care for your Audemars Piguet.

Share your Audemars Piguet model, service history and any concerns. The assessment determines the work your watch needs; a typical service may include:

  1. Movement inspection, dismantling and cleaning
  2. Lubrication, reassembly and regulation
  3. Case and bracelet cleaning
  4. Gasket checks and replacement as required
  5. Water-resistance and pressure testing where appropriate
  6. Mechanical performance testing

Any additional repairs or components are discussed after assessment.

Close-up of an automatic watch movement being worked on with tweezers
A closer look at specialist watch care.

Independent Audemars Piguet care

Talk to a watchmaker.

Tell us about your watch. We’ll email you with the next step.

* Name and email are required

Up to 5 photos, 10 MB each (JPG, PNG, HEIC or WebP). Large photos are made smaller automatically. They are emailed to the workshop with your enquiry and not stored on the website.

Your details are used to reply to this enquiry.

Privacy policy

This form is protected by reCAPTCHA. Google’s Privacy Policy and Terms of Service apply.

Prefer to speak? 020 4531 5299

Care without the guesswork.

Founder-led expertise

25 years of watchmaking experience, applied to the assessment of your watch.

Explore our workshop

A clear next step

Discuss the proposed work and estimate before deciding how to proceed.

Make an enquiry

From enquiry to workshop

Personal care. Clear next steps.

  1. Close-up of an automatic watch movement being worked on with tweezers

    Your watch

    Share the model, symptoms and any service history you know.

  2. Opened watch movements on the bench during a service, beside a gold watch on a leather strap

    Your assessment

    Understand the proposed work and estimate before deciding.

  3. Watch movement held in a movement holder while a part is adjusted with tweezers

    Care & final checks

    Agreed work is followed by checks suited to your watch.

Make an enquiry

From the blog

Before your Audemars Piguet service.

All articles
  • Servicing & Repairs

    How Often Should You Service Your Watch in the UK?

    Understand how often should a watch be serviced for optimal performance. Explore watch maintenance schedule and servicing frequency in the UK.

  • Servicing & Repairs

    Top Signs Your Watch Needs Servicing in London

    Watch servicing London is essential for maintaining your timepiece. This article outlines key signs indicating your watch may need professional attention.

  • Servicing & Repairs

    The Watch Service Checklist: What to Expect

    Understand what happens during a watch service, including the watch maintenance process and what to expect from watch service.

Before you
entrust it to us.

Not sure what your watch needs? Speak with our watchmakers about the next step.

Ask our watchmakers
What will my AP service cost?

Costs depend on the watch and work required. Following an assessment, the team explains the estimate so you can decide how to proceed.

How long will it take?

The condition, complexity and availability of parts affect timing. An estimated completion time is provided after inspection.

Is Alpha Group affiliated with Audemars Piguet?

No. Alpha Group is independent and is not affiliated with Audemars Piguet. Discuss your watch’s requirements, the proposed scope and available documentation with the team.

What should I include in my enquiry?

Include the model or reference if known, its service history and any timekeeping, winding or finish concerns. A short description helps the team understand your enquiry.

Is my enquiry a confirmed booking?

Not yet. This form starts a conversation about your watch. Please wait for the team to confirm the next step and agree a time with you before treating it as an appointment.

London · Farringdon

Let’s talk about
your timepiece.

9 St Cross Street Farringdon · London EC1N 8UB Mon–Fri 10:30–17:30 · Weekends closed
Make an enquiry

Find the workshop.

9 St Cross Street, Farringdon · London EC1N 8UB

Open Google Maps

Audemars Piguet Servicing London: Independent Care Near Hatton Garden

If you are looking into Audemars Piguet servicing, London gives you a choice between the manufacturer’s own service network and an independent workshop. Alpha Group is an independent workshop in Farringdon, just off Hatton Garden. This page is for owners of a Royal Oak, a Royal Oak Offshore or another Audemars Piguet who want to understand what a service involves, where finishing fits in, and how to decide which route suits their watch.

Alpha Group is an independent workshop and is not affiliated with or authorised by Audemars Piguet. We don’t offer the manufacturer’s own route to Audemars Piguet servicing. London owners who prefer that route can arrange it through the brand, and this page explains how the two compare. What we do offer is an assessment at our bench, a straightforward explanation of what your watch needs, and a quotation or estimate that you approve before work starts.

Audemars Piguet in Brief: Le Brassus and the Royal Oak

Audemars Piguet was founded in 1875 in Le Brassus, in Switzerland’s Vallée de Joux, by Jules-Louis Audemars and Edward-Auguste Piguet. For much of its history the company was best known for complicated movements, from chronographs to perpetual calendars and minute repeaters.

That changed in 1972 with the Royal Oak. Designed by Gérald Genta, the original reference 5402 brought together an octagonal bezel with eight hexagonal screws, an integrated steel bracelet and a dial with the “Tapisserie” pattern. The Royal Oak Offshore followed in 1993 as a larger, sportier interpretation. You can read about the manufacturer and its own service arrangements on the Audemars Piguet website.

Those design choices shape Audemars Piguet servicing. London or anywhere else, a Royal Oak asks as much care of its case and bracelet as of its movement, and that is worth understanding before you decide where to send it.

Audemars Piguet Servicing London: Why Finishing Matters

The Royal Oak’s character comes from its finishing. Broad satin-brushed surfaces sit beside narrow polished bevels on the bezel, the case and every link of the bracelet, and the contrast between them is what catches the light. Those edges were defined when the watch was made, and once metal is removed, it doesn’t come back.

That is why refinishing is a decision in its own right, separate from Audemars Piguet servicing. London owners who want a fresher look can still have one, but heavy polishing can round off bevels, blur the line between brushed and polished areas and thin the bracelet’s links. A careful refinish works with the original geometry; an aggressive one replaces it with something softer.

At Alpha Group, refinishing is only carried out when you have asked for it and approved it. Because it may affect collector value, it is discussed during the assessment, alongside the option of leaving honest wear alone. Some owners choose a clean only; others want marks on the clasp addressed but the case left untouched. Our refurbishment and polishing page explains the choices in more depth.

Watch polishing at the Alpha Group workshop, part of Audemars Piguet servicing in London when the owner approves it
Audemars Piguet servicing, London EC1: polishing only ever happens with your approval.
A watch case and bracelet being refurbished on the workshop bench
Brushed and polished surfaces are treated separately.
A watchmaker repairing a watch at the Alpha Group bench in Hatton Garden
Movement work starts with a full assessment.
Specialist watchmaking equipment inside the Alpha Group workshop
Timing and testing equipment at the workshop.

Signs Your Audemars Piguet Needs Attention

Some signs are mechanical, some are cosmetic, and a few are urgent. Look out for:

  • A rate that has changed, with the watch running noticeably fast or slow compared with when you first wore it.
  • A shorter power reserve, or a watch that stops sooner when left off the wrist.
  • A screw-down crown that is hard to engage, or winding that feels rough.
  • On chronograph models, a seconds hand that jumps when started or doesn’t return cleanly to zero.
  • A date that sticks, or changes at the wrong time of day.
  • Rattling or play in the integrated bracelet, especially where it meets the case.
  • Condensation of any kind under the crystal.

Condensation needs prompt action, because moisture can damage the movement and the dial. Keep the crown closed and stop wearing the watch until it has been seen. None of the other signs means a watch is ruined, but each is a reason to arrange Audemars Piguet servicing. London owners who aren’t sure whether a full service is due can start with a watch health check for a clear picture first.

How Often Should an Audemars Piguet Be Serviced?

There is no single date that triggers Audemars Piguet servicing. London owners who wear a watch every day, swim with it or travel with it will usually see the effects of wear sooner than someone who keeps it for occasions. Check the guidance in your watch’s documentation or from the manufacturer, and treat it as a guide rather than a deadline. The signs above, and the way you wear the watch, matter as much as the calendar. If the service history is unknown, which is common with pre-owned watches, an assessment establishes a sensible starting point.

Audemars Piguet Servicing London: What the Work Involves

A full service follows the principles of any fine mechanical watch, but Audemars Piguet servicing, London or elsewhere, brings two particular demands: a case built around visible screws, and decorated movements that show every mark. It helps to think of the work in four parts.

Before the case is opened

The watch is timed in several positions to record its rate, amplitude and beat error, and the case, crown, crystal and bracelet are examined under magnification. On a Royal Oak, the bezel, middle case and caseback are held together by the eight screws visible on the bezel, so the case is opened and closed with care, and the hexagonal heads are left neatly aligned afterwards. The integrated bracelet is detached so the case and links can be cleaned properly.

Inside the movement

The movement is fully dismantled: barrel and mainspring, gear train, escapement, balance, winding system and, on chronograph or calendar models, the extra levers, wheels and springs those functions need. Audemars Piguet movements are decorated with finishes such as Côtes de Genève stripes, perlage and polished bevels, and many modern models show them through a sapphire caseback. Parts are handled so the finishing isn’t marked, then cleaned in a watch cleaning machine and inspected for wear.

Lubrication, reassembly and regulation

The movement is rebuilt with the appropriate oils and greases at each point, in very small, controlled quantities. Slim movements, such as the ultra-thin calibre 2121 that powered the Royal Oak “Jumbo” for decades, reward an unhurried approach. Chronograph mechanisms are adjusted so they start, stop and reset cleanly, the automatic winding is checked, and the watch is regulated on the timing machine across positions.

Case, gaskets and water resistance

Gaskets at the caseback, crown and crystal are checked and replaced as required, and the screw-down crown’s threads and tube are inspected. On chronograph models, the pushers and their seals are checked as part of the same work. Where appropriate, the cased watch is pressure tested. That test checks water resistance at the time of testing; the pressure tested may differ from the original rating, and it isn’t a guarantee of permanent water resistance. The watch then goes through mechanical performance testing before it is ready.

Audemars Piguet Servicing London: Manufacturer or Independent?

Deciding where to send a watch for Audemars Piguet servicing, London-based or not, comes down to your watch and your priorities. Plenty of owners use both routes over the life of a watch.

When the manufacturer is the natural choice

  • Your watch is still under the manufacturer’s warranty, since independent repair work may affect a manufacturer’s commercial warranty.
  • You want the manufacturer’s own service documentation.
  • The watch needs a component or specialist set-up that the manufacturer controls.

When an independent may suit you

  • The watch is out of warranty and you want to speak directly with the people working on it.
  • You have firm views on finishing and want them recorded before anything starts.
  • You want a clear written scope that states whether the job is a limited repair or a complete service.

Should a repair involve an exchange part that the manufacturer requires to be surrendered, you will hear about it before approving the work. Whichever route you take, ask exactly what will be refinished and what may be replaced, and get the answer in writing.

Paperwork is part of the decision too. Some owners like an unbroken record of manufacturer servicing; others are content with a detailed invoice or service record from an independent workshop that sets out what was done. Both document the work. What matters is knowing, before you approve anything, which kind of record your choice of Audemars Piguet servicing, London or Swiss, will give you.

Audemars Piguet Servicing London: Bracelet and Crystal

The integrated bracelet is part of the Royal Oak’s design, tapering link by link from the case to the clasp. Over years of wear, the joints between links develop play, and the bracelet can start to feel loose or rattle. During the assessment the links and clasp are checked and the options explained. For bracelets that use pins, bracelet re-pinning may help. Crystals are checked for chips and cracks too, since a damaged crystal can let moisture reach the dial.

The folding clasp takes daily wear as well. Its hinges and springs are checked for play, and any marks on its visible surfaces fall under the same finishing conversation as the case, so nothing is refinished without your agreement.

Complicated and Older Audemars Piguet Watches

Complications and age raise the stakes for Audemars Piguet servicing. London is home to plenty of older and complicated pieces, from vintage dress watches to perpetual calendars, and each one needs an individual assessment. That assessment is where we discuss whether the work suits our bench or whether the manufacturer is the better route, and where you tell us about any requirements for original parts, finishes or engravings. Those requirements are recorded in the quotation. For older watches that need more than a service, see our vintage watch restoration page.

One practical note for perpetual calendar owners: if the watch has stopped and the calendar has fallen behind, don’t try to correct it by guesswork. Setting a calendar at the wrong moment, or in the wrong order, can damage the calendar works. Leave it as it is and bring it in with any instructions you have.

Preparing for Audemars Piguet Servicing: London Visits and Posted Watches

A little preparation makes the assessment more useful, whether you bring the watch in or send it:

  • Gather the box, papers and any earlier service receipts. They help establish the watch’s history.
  • Bring any spare bracelet links you have, since an integrated bracelet can be harder to size without them.
  • Note the symptoms in your own words: when the watch stops, roughly how much it gains or loses, and whether a function misbehaves.
  • Decide what you want from the finishing, from a clean only to a light refresh of the clasp or a fuller refinish.
  • Mention any engravings, replaced parts you know about, or original components you want kept.

How Audemars Piguet Servicing London Works at Alpha Group

Our process is written down at every stage, so nothing comes as a surprise:

  1. Your brief. Tell us the model or reference if known, its service history and what matters to you: original parts, finishes, engravings or collector value. Start by booking a consultation.
  2. Assessment and quotation. We explain what we found and the work we propose, and provide a quotation or an estimate, stating clearly which one it is.
  3. Your approval. Work begins only once you approve it. The scope is recorded in the approved quotation, including any refinishing you have agreed to.
  4. Deposit, if needed. Sometimes a deposit is needed before parts are ordered or work begins; if so, you receive its amount and purpose in writing.
  5. Timing. You receive an estimated completion time after assessment, and you are told about any material delay.
  6. Completion. You pay once the work is complete, before the watch is collected or sent back.

If a repair warranty applies, its length and what it covers are set out on the approved quotation and confirmed on your invoice or service record. Covered defects in workmanship or parts within that warranty are put right free of charge. Accidental damage isn’t covered, nor is water damage that results from misuse or from ignoring care instructions. The warranty sits alongside your statutory rights, not in place of them.

Caring for Your Audemars Piguet After a Service

The aim of Audemars Piguet servicing, London or elsewhere, is a watch that runs well and wears comfortably. These habits help protect the work:

  • Screw the crown fully down after winding or setting, as the manufacturer instructs.
  • Don’t operate the crown or chronograph pushers in water unless the manufacturer allows it.
  • Mind desks and door frames: the polished bevels of a Royal Oak show knocks and desk wear clearly.
  • Clean the bracelet occasionally with a soft brush and fresh water, crown screwed down, then dry it with a soft cloth.
  • Store the watch away from magnets and from other watches that could scratch it.
  • Have the water resistance checked periodically if you wear the watch in water.

Visiting Alpha Group in Farringdon

The workshop is at 9 St Cross Street, Farringdon, EC1N 8UB, just off Hatton Garden, the district that serves as London’s jewellery quarter and the hub of the UK diamond trade. If you are coming in person for Audemars Piguet servicing, London Underground and rail links make it simple: Farringdon and Chancery Lane stations are each a short walk away. We share the building with our sister business, Kings & Queens Watches. We are at the bench Monday to Friday from 10:30 until 17:30, and closed on Saturdays and Sundays. Reach us on 020 4531 5299, by WhatsApp on +44 7726 776776, or at contact@alphagroupwatchmaking.com.

Audemars Piguet Servicing London FAQs

Will you polish my Royal Oak as part of the service?

Only at your request and with your approval. A typical service includes cleaning the case and bracelet; refinishing is a separate decision, talked through beforehand because it can soften the bevels and may affect collector value.

Can you service an Audemars Piguet chronograph?

Chronographs, including Royal Oak Offshore models, are assessed individually. The assessment explains the work proposed for your particular watch, and whether the manufacturer would be the more suitable route.

Will independent servicing affect my Audemars Piguet warranty?

Possibly. Work by an independent workshop may affect a manufacturer’s commercial warranty, so while your watch is still covered, Audemars Piguet’s own service network is usually the place to start.

Does a pressure test mean my watch is waterproof?

A pressure test is a snapshot. It confirms how the watch performed at the time of testing, and the pressure tested may differ from the original rating. It doesn’t guarantee permanent water resistance, which is why the crown should always be screwed down before the watch meets water.

Can you protect the engraving on my caseback?

Tell us about it at the start. Requirements about engravings are discussed and recorded in the approved quotation, and any refinishing near an engraving is agreed with you first.

Can I send my Audemars Piguet by post?

Yes. Pack it securely and use a carrier whose insurance covers its value. The charges and insurance for its return are confirmed with you before it is dispatched.

What if I can’t collect straight away?

Please collect it, or arrange for it to be returned to you, within 30 days of hearing that it is ready. Remember to bring your invoice or booking receipt when you come in.

Speak to our team on WhatsApp (opens in a new tab)